Welcome Guangdong Shunde Zhongze Mould Co., Ltd. Official website! We will serve you wholeheartedly!

Service Hotline

158-7611-5253

CONTACT US

CONTACT US

Contact: Zhao Fanzhang

Phone: 135-4997-5189

Contact: Xiong Jingyu

Phone: 158-7611-5253

Landline: 0757-25552505

Email: TMXJY@163.com

Official website: www.gdsdzz.com

Address: No. 6, Yongxing Street, Leliu, Shunde District, Foshan City, Guangdong Province

News

Your location:Home > News

What mold is used in the blister box of medical instruments?


source:Foshan Rotomolding|Rotational Molding Processing|Rotational Molding-Shunde Zhongze Mould date:2020-10-21 13:59

Because the other several cheap molds in the blister process are made by hand, and the mother mold is gypsum powder. Not only is it not allowed to enter the clean workshop for production, but also the outer surface of the finished product is rough and the size is not accurate. Moreover, the plaster mold is made of dust, which is the carrier of bacteria. It is strictly forbidden to be used in the suction box of medical devices. The consequence may be that microbial contamination can not be effectively controlled.

医疗器械吸塑盒使用的是什么模具?


Only the aluminum mold is produced by CNC processing, not only the surface of medical device blister box is high transparent, but also the tolerance value can be controlled within plus or minus 0.01mm. For some small parts of class II or III, such as fine catheter or electric knife, only the plastic suction box made of aluminum mold can be tightly clamped, so as to ensure that the insoluble particles in the suction box of medical devices are within the allowable range and are not polluted by other factors.