Welcome Guangdong Shunde Zhongze Mould Co., Ltd. Official website! We will serve you wholeheartedly!

Service Hotline

158-7611-5253

CONTACT US

CONTACT US

Contact: Zhao Fanzhang

Phone: 135-4997-5189

Contact: Xiong Jingyu

Phone: 158-7611-5253

Landline: 0757-25552505

Email: TMXJY@163.com

Official website: www.gdsdzz.com

Address: No. 6, Yongxing Street, Leliu, Shunde District, Foshan City, Guangdong Province

News

Your location:Home > News

What is rotational molding


source:Foshan Rotomolding|Rotational Molding Processing|Rotational Molding-Shunde Zhongze Mould date:2020-10-21 13:56

Rotational molding, also known as rotational molding, is a processing method for manufacturing hollow seamless products of various sizes and shapes. Traditionally, it is mainly used in thermoplastic materials. In recent years, rotational molding of thermosetting materials such as crosslinkable polyethylene has developed rapidly. Since rotational molding does not require high injection pressure, high shear rate or accurate compound metering. As a result, both the polymer and the machine are relatively cheap and have a long service life. Its main advantages are: the machine performance / price is relatively high; complex parts do not need to be assembled after forming; a variety of products and colors can be formed at the same time; the cost of the mold is low; the color and material are easy to change; the loss of leftovers is small.

The basic process is very simple. The powder or liquid polymer is placed in a mold, heated and rotated around two vertical axes at the same time, and then cooled. At the beginning of the heating stage, if the powder material is used, the surface of the mold will form a porous layer, and then melt gradually with the circulation process to form a homogeneous thickness homogeneous layer. If the liquid material is used, it will first flow and coat on the mold surface, and when the gel point is reached, it will stop flowing completely. The mold is then transferred to the cooling work area, cooled by forced ventilation or water spray, and then placed in the work area, where the mold is opened and the finished parts are removed for the next cycle